VT003F VIBRATION MECHANISM
The vibration is created by a PMDC motor that drives three pairs of eccentric wheels attached on the motor shaft. The motor and eccentric wheel assembly is mounted beneath the upper platform, which is supported by four strong springs that are installed on the lower platform.
The eccentric wheels rotation causes circular displacement of the upper platform. The movement is regulated by the supporting springs to create desired linear vibration.
A programmable logic controller commends motor rotation speed and the number of eccentric wheel engaged.
Vibration frequency is decided by the motor speed.
The amplitude is decided by the number of eccentric wheels engaged.
MANUAL CONTROL and PROGRAMMED PLAYS
– Manual Control Mode
Vibration frequency can be adjusted from 15Hz to 40Hz in 20 levels.
Vibration amplitude can be switched between LOW and HIGH. At LOW mode, one pair of eccentric wheels is engaged. At HIGH mode, three pairs eccentric wheel are engaged.
Machine running session time can be selected from 1 to 20 minutes. The default session time is 10 minutes.
– Programmed Plays
Programmed Plays are 10 minute running sessions of gradual increase and decrease of frequency, combined with amplitude switch.
Three Programmed Plays are designed for different purposes.
P1 – SOFT mode: detox and relax
P2 – STONG mode: cardio exercise
P3 – Mix mode: muscle toning and enhancement
Vibration Frequency: 15Hz – 40Hz
Max Amplitude: 3 mm on HIGH / 1.5mm on LOW
Max G-force: 5.82
Electric Motor: 80W PMDC Motor, 900-2400 RPM
Power Supply: 110V 60Hz
Recommended Max Body Weight: 264 LB
Visit our website www.VibrationTherapeutic.com for more information and updated user manual.